Posted by Vaughn [172.69.134.160] on Tuesday, November 12, 2024 at 00:50:42 :
Ok, so you can't use 28-27NPT on a brake line system, you can't use tape on an inverted flare nut, that's true but why would you the nut doesn't seal, and you can't use tape on 28-27NPT fittings. Maybe I'm confused about 28-27NPT thinking it's a NPT when it's not. Go out and look at your PW and take a picture of the stop light switch if it's something other that NPT, I want to see it. At the link there are two files; in file 1, there are 4 fittings, neither a 1/2 or 9/16 wrench fits them, neither a 12, 13, or 14mm wrench fits them only a damn crescent wrench will fit them snug, and these were purchased at NAPA, so by all means if there is a new set of wrenches I'm not aware of other than those I mentioned for these odd ball fitting nuts, please let me know. At the link are two files, take a look and tell me what I'm doing wrong or what I did is not correct. Yes, you shouldn't have to use tape on NPT fittings and if you do, you leave end threads on the NPT exposed some so you don't have a problem with a piece of tape breaking off and causing a problem. Comments are always welcome and appreciated. Thanks
Follow Ups: