Posted by Ernest T Baals [104.23.187.126] on Monday, November 02, 2026 at 17:34:04 :
In Reply to: Re: How I set the bearing preset. posted by Ernest T Baals [162.158.63.102] on Monday, November 02, 2026 at 17:26:52 :
This is what thee manual says
h. Install Hubs and Drums. Install hub which has right-hand
thread on wheel lugs, on the right side of truck and hub with left-hand
thread on left side of truck. Pack the wheel bearings with lubricant
and slide the hubs onto the steering knuckles. Put the outer bearing in
place and install the bearing adjusting inner nut.
i. Adjust Wheel Bearings. Turn the inner adjusting nut up tight
and then back it off about ^ of a turn. Install the adjusting nut lock,