Posted by Power Wagon Classified Ads [172.71.23.168] on Thursday, October 29, 2026 at 10:29:33 :

By Original Owner: 1967 Dodge D200, NO RUST, 3/4-TON, full floating rear axle & bearings, limited-slip differential, VERY-HEAVY overload springs, 318LA V-8, Automatic transmission, Power-steering, Power-brakes, new tires, about 156K miles, engine rebuilt at about 105K miles. $5,500.
This 1967 Dodge is my farm truck, stored in a barn, stored out of the rain most of its life. It gets driven only once or twice/year. I did not drive it at all last year because I’m too Damn old. It drives and hauls with the reliability of a new truck. I love this truck, but I will not be around much longer, and my heirs won’t know what to do with it.
With this 1967 Dodge, comes a FREE 1966 Dodge parts truck with TOTALLY STRAIGHT BODY, straight hood & straight fenders & straight front bumper. This is a 2nd truck, FREE. Note that the 5th photo here is of this FREE truck.
Here is the story of how the dents occurred in this truck: On these trucks, Dodge over-powered the brakes and steering. About 1994, not long after the government created Amtrak, some kid (not old enough to drive) stole an huge Amtrak bus and crashed it into a ditch right in front of me. I slammed on the brakes and they locked-up, skidded and that is how the front-left fender-hood-headlight got dented. I bought the 1966 Dodge with the intention of switching the hood and fender, but then only drove the 1967 Dodge occasionally, so the restoration project never got started. All one has to do is un-bolt the fender, and 2 people can lift it over to the other truck.
This straight, 1966 Dodge comes free with the 1967 Dodge. Being I was 29-years old when we purchased this 1967 Dodge, I am now 88 and too damn old & weak to transfer the hood and fenders. Therefore, you get the 1966 Dodge free, along with the 1967 Dodge D200.
The rear axle/differential are perfect. Due to my theoretical study of gears, I recently completely drained and replaced the differential gear oil. The differential and bearings are perfect. It takes about 4,000 lbs to put the overload bumpers all the way down to contact with the overload springs. This truck was made for super-heavy loads.
Recently, new 10 ply tires were installed on the front wheels, the best tires made. Same story for the rear tires, but about 10 years ago, the best 10 ply tires on the market.
Contact me for more detailed photos which show the true, excellent condition of this truck.
Contact Norm [email protected]
Located in Monmouth Oregon 97361