Posted by Greg Coffin [172.68.150.210] on Wednesday, October 07, 2026 at 18:59:02 :
In Reply to: bedt scenaroo for a flathead posted by clueless [104.22.55.140] on Wednesday, October 07, 2026 at 14:26:52 :
My son and I put a turbo on our 230 powered M37, and it works very well. I'll give you a few tips, and you can do with them as you wish.
- You can run 4-5 lbs of boost without having to do a lot of upgrade work to the engine.
- We built our system with a Weber 32/36 progressive carb. It's a draw-through system, which is very easy to set up. A number of "experts" said it would never work - so much for expert opinions.
- You will need to change the turbo seals if you run a draw-through system. You will need an aftercooler if you run a blow-through system.
- Find a turbo set up for a 3.8-4.0 liter diesel.
- The engine now produces power and torque like a stock 318, with the advantage that the peak torque is still below 2500 rpm.
- Boost starts at 1000 rpm.
- With a straight pipe the truck sounds like a 5.9 conversion :)
- You need a heated downpipe on a draw-through carb or it will ice up. We put a cable-controlled valve on the water lines so we can cool the carb in the summer by closing the valve.
- We made our own steel exhaust manifold after the factory cast iron one cracked.
Follow Ups: