Posted by Tom Petroff (IL) [172.69.59.25] on Friday, September 25, 2026 at 20:28:26 :
In Reply to: Electrical Issue - Paging Tom Petroff posted by Clint Dixon [172.71.255.79] on Friday, September 25, 2026 at 19:18:28 :
Hi Clint
Sounds like a shorted coil and can happen
Slowly over time.
Do a ohm test by removing + & - wires from the
Primary terminals
Set ohm meter lowest setting probably
200 ohm setting.
The reading between the + & - terminal should
Be around 1.5 ohms to 2.0 ohms.
Next set vom meter to 20,000 ohms and test
The secondary winding by probing the tower
To either the + or - terminal.
Should be between 6k to 12k ohm range.
Fyi
On 12volt system the coil readings would be doubled.
Tom
Follow Ups: