Posted by john r eickhof [172.68.34.28] on Monday, November 11, 2024 at 17:58:15 :
In Reply to: Re: SOB posted by Marty [162.158.146.45] on Monday, November 11, 2024 at 03:21:29 :
ALL fittings on vehicles after 1960 are required to use double flare fittings for safety reasons. you need to spend the money and buy a solid brass or stainless steel tee with double flare fittings at the tubing size you are using, these are machined especially for brake or hydraulic use and require no other fittings, just the brake lines and compression nut to install. Old Marty is right on the nut here! They are available with different sizes also if its a pressure line from the mc the input fitting to the tee will generally be larger than the output lines vor proper volume proportioning.