Posted by Tom Petroff (IL) [172.70.130.241] on Tuesday, October 08, 2024 at 14:23:35 :
In Reply to: Re: 1948 Dodge Power Wagon pick up bed posted by Tom Petroff (IL) [172.69.58.43] on Tuesday, October 08, 2024 at 14:09:21 :
You can search the archives by clicking
"Phil's Archives" top of forum page.
A quick search found this post by Steve Pellock for the later 2nd series bed wood, which you will notice is different from what I sent you.
Posted by Steve Pellock on Friday, September 08, 2006 at 8:44AM :
In Reply to: Bed Wood Dimensions posted by Kevin in Rehoboth on Thursday, September 07, 2006 at 7:51PM :
I measured mine that are about ready for install.
length = 93_3/4"
rabbit = 5/8" wide x 3/16" deep
6 boards 5_1/8" wide x 13/16" thick
2 boards at 9_13/16" wide x 13/16" thick. The outside rabbit is wider to fit the strip on the bed sides on these two boards.
originally black but I used a clear spar varnish as I couldn't see covering up that beautiful white oak.
This is for 2nd series but should be the same for 3rd series