Solved, with dimensions

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Daniel Saucy [] on Sunday, April 21, 2024 at 17:05:19 :

In Reply to: Crank Shaft Pulley posted by Daniel Saucy [] on Monday, April 15, 2024 at 13:17:20 :

Started over, from scratch, after a few days of "rest".

Crank snout is 1.38" long. Crank Pulley (from the 251) is 1.69" deep. So, the hub can bottom out on the crank snout. I don't know what I mis-measured the first time around.

The crank pulley is 3.0" from the base of the hub to the centerline of the V-groove . The water pump pulley, mounted on the 251 water pump on the 265 block, has its V-groove center 2.75" out from the base of the snout.

So, all I need is a spacer to push the water-pump pulley out a bit, and everything is good to go.

I apologize for my error somewhere leading you all on a wild goose chase. But, it does remind me that taking a break, starting afresh, throwing the old piece of paper away, can often "solve" the problem.

Follow Ups:

Post a Followup

Optional Link
Optional Image Link

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button