Posted by Vaughn [18.104.22.168] on Sunday, May 07, 2023 at 13:05:49 :
In Reply to: positioning the bed cross member question posted by Karl [22.214.171.124] on Saturday, May 06, 2023 at 20:10:15 :
There probably be some that disagree with this, but here it goes:
- Boards have to be 1 inch thick.
- You need a 1/4 inch pad under each cross member except for the one with the rubber free pad over the tank. You need this for clearance over the tank and it doesn't affect mounting the fenders on the rear bracket.
- I used 1/8 inch tank steel for my bed supported by 3/4 inch wood on top of the crossmembers to make the 1 inch needed.
You see where things are from the images.
Post a Followup