Posted by Bruce in BC [22.214.171.124] on Tuesday, June 21, 2022 at 12:42:34 :
In Reply to: And Another Question; fuel line posted by Todd Miller [126.96.36.199] on Monday, June 20, 2022 at 15:46:10 :
I switched to copper nickel line awhile back - sure bends easier than steel and it lasts much longer.
The other trick is to put a dab of grease between the fitting and the tube (not in the line) which helps when taking the line off at a later time.
also teflon tape on the threads - not to seal- but to help when taking a part off at a later date.
Yes these little tricks work - but they add time and you need to do it with care and not get anything in the tube.
Post a Followup