Posted by Torvald [22.214.171.124] on Tuesday, June 14, 2022 at 19:37:28 :
In Reply to: Re: Engine/Trany, Transfer Case, Rear Axle Pinion alignment posted by Bruce in BC [126.96.36.199] on Tuesday, June 14, 2022 at 16:34:43 :
Thanks Bruce. I've seen 1/2 and 1 degree difference in angles stated as the max to avoid vibration. Either way it has to be close. I'm concerned that if I change the angle of the drive pinion to match the Xfer Case now with NO weight on the frame, by the time I get the body on, and worse, when it's hauling a load, the angle will have changed and be out of spec. So I'm wondering what amount of change to expect.
Post a Followup