Posted by Jerry in Idaho [188.8.131.52] on Tuesday, November 02, 2021 at 18:08:56 :
In Reply to: I'M A STRIPPER posted by Rick Robbins [184.108.40.206] on Tuesday, November 02, 2021 at 15:46:15 :
Once you strip all the teeth off the gears it'll be a lot easier. :)
Seriously, shifting up is pretty easy. Depress the clutch pedal, move the lever into neutral. Release the clutch. Let the engine rpms drop, depress the clutch again, and move the lever into the next gear up. It should be a pretty smooth transition with no grinding.
Shifting down is harder, as Steve said. Do the same process, only you have to rev the engine to shift to the next gear down. I find the engine has to rev a little higher each time I go lower in the gears.
Post a Followup