Posted by Vaughn [184.108.40.206] on Saturday, September 18, 2021 at 11:49:40 :
In Reply to: Re: Headbolts posted by Joe Leydon [220.127.116.11] on Saturday, September 18, 2021 at 10:50:10 :
They are a little over 2-15/16 so you have to check the bolt holes. Those that go into the water jacket are not an issue other that more rust to deal with when removing which can be an issue. Some of the bolt holes along the exhaust side are closed bottom so you have to measure the length to determine if you have enough, if not grind off excess. This is ONLY if you want to use these bolts, otherwise you can get the correct bolts at the link.
Post a Followup