Posted by Ken [126.96.36.199] on Saturday, June 05, 2021 at 18:37:33 :
In Reply to: StartING question posted by Tom in Oregon [188.8.131.52] on Monday, May 31, 2021 at 19:07:57 :
What is the condition of the cable from the battery to the starter. It needs to be a heavy 6 volt cable not a smaller diameter 12V cable. Check the ends for corrosion. A bad or too small of a cable will drop the voltage at the coil too low to start. When you quit cranking the engine is still spinning, the coil voltage goes back up and it starts.
Post a Followup