Chrysler one Wire Hookup

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Vaughn [] on Friday, April 02, 2021 at 16:26:06 :

In Reply to: 12V Generator to Alternator Swap out questions posted by Glenn McGillicuddy [] on Friday, April 02, 2021 at 08:43:32 :

Ok, if you are using a Chrysler one wire, this s/b how it should be hooked up:

- The black wire from the regulator connects to the ammeter, from it to the ignition switch. Connect the white wire to the black wire.

- You will also need to connect a wire from the "+" battery cable post on the solenoid to the alternator’s battery post.

- You should not need to connect an inline diode in the black wire to prevent draining of the battery, the switch should do that.

- Connect the light green wire from the horn to the black wire.

- Disregard the regulator.

Follow Ups:

Post a Followup

Optional Link
Optional Image Link

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button