Re: 1950 engine oil pan removal

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Vaughn [] on Tuesday, February 16, 2021 at 13:54:44 :

In Reply to: 1950 engine oil pan removal posted by Craig Klages [] on Tuesday, February 16, 2021 at 12:32:16 :

Yes, you can do it. The difficult part is putting the pan back on with the new gasket. Place the gasket on the pan with the sealer of your choice, then work the pan up and screw in a couple bolts to hold the pan up until you get all bolts in place, then tighten. Use silicone seal on the gasket joints. If you are using a 3/8 extension, it helps to have a universal joint between the end of the extension and 1/2 inch socket.

Follow Ups:

Post a Followup

Optional Link
Optional Image Link

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button