Re: Broken manifold, why?

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by John S [] on Saturday, January 30, 2021 at 10:06:20 :

In Reply to: Broken manifold, why? posted by Greg Coffin [] on Friday, January 29, 2021 at 21:54:04 :

That is an area that is pron to cracks . It looks like you have the fasteners installed properly. If the manifold cooled or heated evenly,then I would believe it was the modification for the turbo that contributed to the failure. I would weld it with a nickle based rod. Ni 55 stick rod is a good one. The welding method is important.Follow it and you will be successful. You may need to cut the mating surface to get true enough to bolt to your block. Flatness is critical check that your intake aligns with the exhaust as well. If you can machine it as an assembly it is a plus.

Follow Ups:

Post a Followup

Optional Link
Optional Image Link

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button