Re: Winch Drum

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Clint Dixon [] on Sunday, May 03, 2020 at 20:06:03 :

In Reply to: Winch Drum posted by Nick [] on Saturday, May 02, 2020 at 03:48:31 :

As long as the drum is always held tight against the mounting leg, either by the clutch dog, or by the brake, you should be okay. It is okay if the drum slides back towards the gear box when there is nothing to push it away.

Is your clutch lever new or old? There are subtle differences in these and some of the newly manufactured ones, over the past couple of decades, have been way out of specs. Sometimes it takes a space between the clutch arm pivot bracket and the gearbox casting.

If the locking bracket mounted to the rear winch angle is new, it could have the holds in the wrong place causing the arm to not travel far enough, or to "park" in the correct location.


Follow Ups:

Post a Followup

Optional Link
Optional Image Link

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button