Posted by TerryD [126.96.36.199] on Thursday, October 31, 2019 at 16:07:12 :
In Reply to: Re: ls swap ffpw posted by mannyc [188.8.131.52] on Thursday, October 31, 2019 at 14:00:13 :
I did not say it was impossible with the steering box, only a challenge.
You could use a "high sweep" header, much like the old 50's hot rod type, or you can use the stock cast manifold and cut a 45* between the middle exhaust ports and the end port, then reverse the piece and braze or cast iron weld back together. Will look like a sideways "S" when done.
Post a Followup