Posted by Dean Dysart [220.127.116.11] on Wednesday, October 02, 2019 at 00:32:44 :
In Reply to: Re: FFPW Transmission Swap posted by Kaegi [18.104.22.168] on Monday, September 30, 2019 at 11:34:18 :
It was a piece of cake and I did it by myself. I used an ATV jack. The ATV jack has four wheels and is meant to be rolled with a load on it. I put two pieces of 2 by 8 lumber on the jack and a 2 inch wedge for the difference between the bottom of the PTO and the bottom of the transmission. It set on the jack like a toad on a rock.
I tied back the three levers on the right side with a bungee cord. Ran the jack up snug with the bottom of the transmission. Slid the trans out using guide bolts on the top two bolt holes. Lowered the transmission to the floor and tilted it to one side to clear the frame and rolled it out.
Post a Followup