Posted by Clint Dixon [220.127.116.11] on Sunday, June 09, 2019 at 19:13:31 :
In Reply to: Steering shaft & Dash Not Lining Up posted by Dean [18.104.22.168] on Saturday, June 08, 2019 at 20:24:06 :
If your frame is a 1949, you have to use the wood mounting blocks between the cab and frame, but only at the front bolts. The rear mounts just get the 1/4-inch thick fiber filler. If you try to use the later rubber spacers front and back, doing so will tilt the cab forward and cause a misalignment at the steering column. The frames changed when the cab mounting method changed.
Post a Followup