Posted by Don in MD [220.127.116.11] on Saturday, June 08, 2019 at 07:25:39 :
In Reply to: Re: clutch pedal linkage clearance posted by Vaughn [18.104.22.168] on Friday, June 07, 2019 at 14:01:19 :
Sat. morning update: with the suspect bolt in the clutch pedal mounting plate. When I place the trans in gear and depress the cluth to the bolt, no go, no rotation can be gotten from the outgoing drive shaft on the transmission. With the suspect bolt removed, success, the outgoing driveshaft rotates freely! Amazing how just the 1/4" makes a difference. So my plan is to mayby grind down the head of the bolt, leaving just enough to install it, or just leaving it out like the previous owner(s) have done.
Vaughn, I think you're right, a slight spacer between the trans and clutch housing would be helpful.
Going to "play" with it some more in the coming week and see if I can "tweak it" some more for easier adjustment.
Thanks again to everyone for your help/insight/advice..........I'm sure I'll have more questions before long.
Oh, payment made to Matt for new fenders, bedsides, and running boards! Can't wait to get them!!!! Slowly coming together!
Post a Followup