Re: clutch pedal linkage clearance

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Vaughn [] on Friday, June 07, 2019 at 14:01:19 :

In Reply to: Re: clutch pedal linkage clearance posted by Don in MD [] on Friday, June 07, 2019 at 11:37:22 :

You're right it is very tight. If you back off the trans mounting bolts, push the clutch in, you can almost push the trans back from the fork hiting the retainer. I'm considering adding a 1/16 plate or spacer between the bell housing and trans to allow the fork more movement. I think a lot of grinding with gears on the spur gear trans is do to the fork not being able to press far enough on the clutch cover to reduce the disk friction.

Follow Ups:

Post a Followup

Optional Link
Optional Image Link

(1) Type your Message (2) Load New Code (3) Type new code into box. (4) Click "Post Message" button